Fine Liner Pro
- Partial data fit
- Specs Only
- B
- 11 source records
Issue data limited
Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 4 Pro
A structured side-by-side profile for Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 4 Pro, built from indexed specs, seller records, source coverage, and issue-signal data.
This is a data comparison, not a hands-on lab test unless a machine is explicitly marked as tested.
Profile snapshot
Ultron 4 Pro
- Good data fit
- Specs Only
- B
- 12 source records
Issue data limited
Use-case fit
Vlad Blad Ultron 4 Pro
Stroke reach, hit signal, and power stability.
Vlad Blad Fine Liner Pro
Weight, control, and smoother lower-stroke fit.
Vlad Blad Ultron 4 Pro
Stroke reach, hit signal, and power stability for packing.
Key differences
10 differing data points found in the current profiles.
Type
- Fine Liner Pro
- Coil
- Ultron 4 Pro
- Pen
Power
- Fine Liner Pro
- Wired
- Ultron 4 Pro
- Wireless
Stroke System
- Fine Liner Pro
- Unknown
- Ultron 4 Pro
- Adjustable stroke
Stroke
- Fine Liner Pro
- Check specs
- Ultron 4 Pro
- 3.2 / 3.5 / 3.8 / 4.2 / 4.7 / 5.5
Weight
- Fine Liner Pro
- 198g
- Ultron 4 Pro
- 272g
Voltage
- Fine Liner Pro
- 5-8V
- Ultron 4 Pro
- 12-12V
Decision snapshot
Fine Liner Pro
198g
Lower listed weight can matter during longer sessions.
€549
Weight, control, and smoother lower-stroke fit.
Coil
Wired
Ultron 4 Pro
Good data fit
Closest overall data-match estimate in this comparison.
12 source records
More source records make the profile easier to verify.
Stroke reach, hit signal, and power stability.
Stroke reach, hit signal, and power stability for packing.
Pen
Side-by-side specs
| Spec | Fine Liner Pro | Ultron 4 Pro |
|---|---|---|
| Type | Coil | Pen |
| Power | Wired | Wireless |
| Stroke System | Unknown | Adjustable stroke |
| Stroke | Check specs | 3.2 / 3.5 / 3.8 / 4.2 / 4.7 / 5.5 |
| Stroke Step | Not listed | Not listed |
| Needle Depth | Check specs | Check specs |
| Weight | 198g | 272g |
| Voltage | 5-8V | 12-12V |
| Runtime | Not listed | 22 h |
| Charge Time | Not listed | 2 h |
| Motor | Stroker | Brushless |
| Motor Size | Not listed | Not listed |
| Motor Speed | 12,000 RPM | 7,800 RPM |
| Frequency | 30-130 Hz | 10-130 Hz |
| Best Price | €549 | €1,377 |
| Sellers | 3 | 3 |
| Source Coverage | B | B |
| Reported Issue Signals | Issue data limited | Issue data limited |
Continue your research
Brand profiles
Related categories
Compare next
Sources behind this comparison
Open the underlying profile or a directly indexed source before treating a difference as final.
Fine Liner Pro
Latest indexed check: May 15, 2026
Vlad Blad Fine Liner Pro frequency Hz syncOpen source ↗Detail gap resolutionOpen source ↗Fine Liner Pro sourceOpen source ↗
Full profile →Ultron 4 Pro
Latest indexed check: May 15, 2026
Vlad Blad Ultron 4 Pro frequency Hz syncOpen source ↗Detail gap resolutionOpen source ↗Ultron 4 Pro sourceOpen source ↗
Full profile →Creator / Owner Review Reference Comparison
No curated creator or owner review references are attached to this exact comparison yet. Only strict model-matched references are shown.
Similar Profiles to Check Next
Reading the comparison
Vlad Blad Ultron 4 Pro
Closest overall data-match estimate in this comparison.
Vlad Blad Fine Liner Pro
Lower reported issue signal among the compared profiles.
Vlad Blad Fine Liner Pro
Lower listed weight can matter during longer sessions.
Vlad Blad Ultron 4 Pro
More source records make the profile easier to verify.
FAQ
Which machine has the closer data fit in Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 4 Pro?
Vlad Blad Ultron 4 Pro currently has the closer data-fit estimate. Treat this as a research signal and still compare weight, stroke, seller records, and issue coverage.
Is this Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 4 Pro comparison hands-on tested?
No. It is a structured data comparison unless an individual machine is explicitly marked as hands-on tested.
How should issue signals be read?
Issue signals are public-source research signals, not verified defect rates. Use them as prompts for deeper source checking.