Ultron 3
- Good data fit
- Specs Only
- C
- 13 source records
2 signals across 1 sources (High)
Vlad Blad Ultron 3 vs Vlad Blad Avenger 4 Pro
A structured side-by-side profile for Vlad Blad Ultron 3 vs Vlad Blad Avenger 4 Pro, built from indexed specs, seller records, source coverage, and issue-signal data.
This is a data comparison, not a hands-on lab test unless a machine is explicitly marked as tested.
Profile snapshot
Avenger 4 Pro
- Good data fit
- Specs Only
- B
- 13 source records
1 signals across 1 sources (High)
Use-case fit
Vlad Blad Avenger 4 Pro
Stroke reach, hit signal, and power stability.
No clear match from current data.
Vlad Blad Avenger 4 Pro
Stroke reach, hit signal, and power stability for packing.
Key differences
12 differing data points found in the current profiles.
Type
- Ultron 3
- Pen
- Avenger 4 Pro
- Rotary
Stroke System
- Ultron 3
- Fixed-stroke variants
- Avenger 4 Pro
- Adjustable stroke
Stroke
- Ultron 3
- 3.7 / 4.2 / 4.7mm
- Avenger 4 Pro
- 3.2 / 3.5 / 3.8 / 4.2 / 4.7 / 5.5
Weight
- Ultron 3
- 178g
- Avenger 4 Pro
- 167g
Runtime
- Ultron 3
- 7 h
- Avenger 4 Pro
- 13 h
Charge Time
- Ultron 3
- 1.5 h
- Avenger 4 Pro
- 3 h
Decision snapshot
Ultron 3
Pen
Wireless
3.7 / 4.2 / 4.7mm
178g
Check seller
Avenger 4 Pro
Good data fit
Closest overall data-match estimate in this comparison.
167g
Lower listed weight can matter during longer sessions.
13 h
Stroke reach, hit signal, and power stability.
Stroke reach, hit signal, and power stability for packing.
Side-by-side specs
| Spec | Ultron 3 | Avenger 4 Pro |
|---|---|---|
| Type | Pen | Rotary |
| Power | Wireless | Wireless |
| Stroke System | Fixed-stroke variants | Adjustable stroke |
| Stroke | 3.7 / 4.2 / 4.7mm | 3.2 / 3.5 / 3.8 / 4.2 / 4.7 / 5.5 |
| Stroke Step | Not listed | Not listed |
| Needle Depth | Check specs | Check specs |
| Weight | 178g | 167g |
| Voltage | 12-12V | 12-12V |
| Runtime | 7 h | 13 h |
| Charge Time | 1.5 h | 3 h |
| Motor | Brushless | M3Pro / Flywheel |
| Motor Size | Not listed | Not listed |
| Motor Speed | 9,000 RPM | 7,800 RPM |
| Frequency | 30-130 Hz | 10-130 Hz |
| Best Price | Check seller | €1,097 |
| Sellers | 3 | 3 |
| Source Coverage | C | B |
| Reported Issue Signals | 2 signals across 1 sources (High) | 1 signals across 1 sources (High) |
Continue your research
Brand profiles
Related categories
Sources behind this comparison
Open the underlying profile or a directly indexed source before treating a difference as final.
Ultron 3
Latest indexed check: May 15, 2026
Vlad Blad Ultron 3 frequency Hz syncOpen source ↗Detail gap resolutionOpen source ↗Official product pageOpen source ↗
Full profile →Avenger 4 Pro
Latest indexed check: May 15, 2026
Vlad Blad Avenger 4 Pro frequency Hz syncOpen source ↗Detail gap resolutionOpen source ↗Avenger 4 Pro sourceOpen source ↗
Full profile →Creator / Owner Review Reference Comparison
No curated creator or owner review references are attached to this exact comparison yet. Only strict model-matched references are shown.
Similar Profiles to Check Next
Reading the comparison
Vlad Blad Avenger 4 Pro
Closest overall data-match estimate in this comparison.
Vlad Blad Ultron 3
Lower reported issue signal among the compared profiles.
Vlad Blad Avenger 4 Pro
Lower listed weight can matter during longer sessions.
Vlad Blad Ultron 3
More source records make the profile easier to verify.
FAQ
Which machine has the closer data fit in Vlad Blad Ultron 3 vs Vlad Blad Avenger 4 Pro?
Vlad Blad Avenger 4 Pro currently has the closer data-fit estimate. Treat this as a research signal and still compare weight, stroke, seller records, and issue coverage.
Is this Vlad Blad Ultron 3 vs Vlad Blad Avenger 4 Pro comparison hands-on tested?
No. It is a structured data comparison unless an individual machine is explicitly marked as hands-on tested.
How should issue signals be read?
Issue signals are public-source research signals, not verified defect rates. Use them as prompts for deeper source checking.