WJX W4
- Good data fit
- Specs Only
- B
- 13 source records
4 signals across 2 sources (Medium)
Dragonhawk WJX W4 vs CNC Tattoo E97
A structured side-by-side profile for Dragonhawk WJX W4 vs CNC Tattoo E97, built from indexed specs, seller records, source coverage, and issue-signal data.
This is a data comparison, not a hands-on lab test unless a machine is explicitly marked as tested.
Profile snapshot
E97
- Good data fit
- Specs Only
- B
- 9 source records
3 signals across 2 sources (Medium)
Use-case fit
CNC Tattoo E97
Stroke reach, hit signal, and power stability.
CNC Tattoo E97
Weight, control, and smoother lower-stroke fit.
CNC Tattoo E97
Stroke reach, hit signal, and power stability for packing.
Key differences
9 differing data points found in the current profiles.
Needle Depth
- WJX W4
- Check specs
- E97
- 0-4.5
Weight
- WJX W4
- 198g
- E97
- 185g
Runtime
- WJX W4
- 5.5 h
- E97
- 12 h
Charge Time
- WJX W4
- 2.4 h
- E97
- 1 h
Motor
- WJX W4
- Brushless
- E97
- Coreless
Frequency
- WJX W4
- 70-185 Hz
- E97
- 50-173 Hz
Decision snapshot
WJX W4
13 source records
More source records make the profile easier to verify.
3
Pen
Wireless
3.5
E97
Good data fit
Closest overall data-match estimate in this comparison.
185g
Lower listed weight can matter during longer sessions.
12 h
$89.99
Stroke reach, hit signal, and power stability.
Side-by-side specs
| Spec | WJX W4 | E97 |
|---|---|---|
| Type | Pen | Pen |
| Power | Wireless | Wireless |
| Stroke System | Fixed stroke | Fixed stroke |
| Stroke | 3.5 | 3.5 |
| Stroke Step | Not listed | Not listed |
| Needle Depth | Check specs | 0-4.5 |
| Weight | 198g | 185g |
| Voltage | 4-12V | 4-12V |
| Runtime | 5.5 h | 12 h |
| Charge Time | 2.4 h | 1 h |
| Motor | Brushless | Coreless |
| Motor Size | Not listed | Not listed |
| Motor Speed | 10,000 RPM | 10,000 RPM |
| Frequency | 70-185 Hz | 50-173 Hz |
| Best Price | $109 | $89.99 |
| Sellers | 3 | 2 |
| Source Coverage | B | B |
| Reported Issue Signals | 4 signals across 2 sources (Medium) | 3 signals across 2 sources (Medium) |
Continue your research
Brand profiles
Related categories
Sources behind this comparison
Open the underlying profile or a directly indexed source before treating a difference as final.
WJX W4
Latest indexed check: Jul 4, 2026
Dragonhawk WJX W4 motor speed RPM syncOpen source ↗Dragonhawk / Mast OfficialOpen source ↗Dragonhawk official image OCROpen source ↗
Full profile →E97
Latest indexed check: Jul 4, 2026
CNC E97 manual complaint evidenceOpen source ↗CNC Tattoo OfficialOpen source ↗CNC Tattoo official image OCROpen source ↗
Full profile →Creator / Owner Review Reference Comparison
No curated creator or owner review references are attached to this exact comparison yet. Only strict model-matched references are shown.
Similar Profiles to Check Next
Reading the comparison
CNC Tattoo E97
Closest overall data-match estimate in this comparison.
Dragonhawk WJX W4
Lower reported issue signal among the compared profiles.
CNC Tattoo E97
Lower listed weight can matter during longer sessions.
Dragonhawk WJX W4
More source records make the profile easier to verify.
FAQ
Which machine has the closer data fit in Dragonhawk WJX W4 vs CNC Tattoo E97?
CNC Tattoo E97 currently has the closer data-fit estimate. Treat this as a research signal and still compare weight, stroke, seller records, and issue coverage.
Is this Dragonhawk WJX W4 vs CNC Tattoo E97 comparison hands-on tested?
No. It is a structured data comparison unless an individual machine is explicitly marked as hands-on tested.
How should issue signals be read?
Issue signals are public-source research signals, not verified defect rates. Use them as prompts for deeper source checking.