Fine Liner Pro
- Partial data fit
- Specs Only
- B
- 11 source records
Issue data limited
Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 3
A structured side-by-side profile for Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 3, built from indexed specs, seller records, source coverage, and issue-signal data.
This is a data comparison, not a hands-on lab test unless a machine is explicitly marked as tested.
Profile snapshot
Ultron 3
- Good data fit
- Specs Only
- C
- 13 source records
2 signals across 1 sources (High)
Use-case fit
Vlad Blad Ultron 3
Stroke reach, hit signal, and power stability.
Vlad Blad Ultron 3
Weight, control, and smoother lower-stroke fit.
Vlad Blad Ultron 3
Stroke reach, hit signal, and power stability for packing.
Key differences
11 differing data points found in the current profiles.
Type
- Fine Liner Pro
- Coil
- Ultron 3
- Pen
Power
- Fine Liner Pro
- Wired
- Ultron 3
- Wireless
Stroke System
- Fine Liner Pro
- Unknown
- Ultron 3
- Fixed-stroke variants
Stroke
- Fine Liner Pro
- Check specs
- Ultron 3
- 3.7 / 4.2 / 4.7mm
Weight
- Fine Liner Pro
- 198g
- Ultron 3
- 178g
Voltage
- Fine Liner Pro
- 5-8V
- Ultron 3
- 12-12V
Decision snapshot
Fine Liner Pro
Coil
Wired
Check specs
198g
€549
Ultron 3
Good data fit
Closest overall data-match estimate in this comparison.
178g
Lower listed weight can matter during longer sessions.
13 source records
More source records make the profile easier to verify.
Stroke reach, hit signal, and power stability.
Weight, control, and smoother lower-stroke fit.
Side-by-side specs
| Spec | Fine Liner Pro | Ultron 3 |
|---|---|---|
| Type | Coil | Pen |
| Power | Wired | Wireless |
| Stroke System | Unknown | Fixed-stroke variants |
| Stroke | Check specs | 3.7 / 4.2 / 4.7mm |
| Stroke Step | Not listed | Not listed |
| Needle Depth | Check specs | Check specs |
| Weight | 198g | 178g |
| Voltage | 5-8V | 12-12V |
| Runtime | Not listed | 7 h |
| Charge Time | Not listed | 1.5 h |
| Motor | Stroker | Brushless |
| Motor Size | Not listed | Not listed |
| Motor Speed | 12,000 RPM | 9,000 RPM |
| Frequency | 30-130 Hz | 30-130 Hz |
| Best Price | €549 | Check seller |
| Sellers | 3 | 3 |
| Source Coverage | B | C |
| Reported Issue Signals | Issue data limited | 2 signals across 1 sources (High) |
Continue your research
Brand profiles
Related categories
Sources behind this comparison
Open the underlying profile or a directly indexed source before treating a difference as final.
Fine Liner Pro
Latest indexed check: May 15, 2026
Vlad Blad Fine Liner Pro frequency Hz syncOpen source ↗Detail gap resolutionOpen source ↗Fine Liner Pro sourceOpen source ↗
Full profile →Ultron 3
Latest indexed check: May 15, 2026
Vlad Blad Ultron 3 frequency Hz syncOpen source ↗Detail gap resolutionOpen source ↗Official product pageOpen source ↗
Full profile →Creator / Owner Review Reference Comparison
No curated creator or owner review references are attached to this exact comparison yet. Only strict model-matched references are shown.
Similar Profiles to Check Next
Reading the comparison
Vlad Blad Ultron 3
Closest overall data-match estimate in this comparison.
Vlad Blad Ultron 3
Lower reported issue signal among the compared profiles.
Vlad Blad Ultron 3
Lower listed weight can matter during longer sessions.
Vlad Blad Ultron 3
More source records make the profile easier to verify.
FAQ
Which machine has the closer data fit in Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 3?
Vlad Blad Ultron 3 currently has the closer data-fit estimate. Treat this as a research signal and still compare weight, stroke, seller records, and issue coverage.
Is this Vlad Blad Fine Liner Pro vs Vlad Blad Ultron 3 comparison hands-on tested?
No. It is a structured data comparison unless an individual machine is explicitly marked as hands-on tested.
How should issue signals be read?
Issue signals are public-source research signals, not verified defect rates. Use them as prompts for deeper source checking.